CHAPTER 1
Using Cisco IOS XE Software
This chapter provides information to prepare you to configure a SPA interface processor (SIP) or shared
port adapter (SPA) using the Cisco IOS XE software. It includes the following sections:
•
Accessing the CLI Using a Router Console, page 1
•
Using Keyboard Shortcuts, page 6
•
Using the History Buffer to Recall Commands, page 7
•
Understanding Command Modes, page 7
•
Getting Help, page 8
•
Using the no and default Forms of Commands, page 12
•
Saving Configuration Changes, page 12
•
Filtering the Output of the show and more Commands, page 12
•
Finding Support Information for Platforms and Cisco Software Images, page 13
Accessing the CLI Using a Router Console
The following sections describe how to access the command-line interface (CLI) using a directly-connected
console or by using Telnet to obtain a remote console:
For more detailed information about configuring and accessing a router through various services, refer to the
Cisco IOS Terminal Services Configuration Guide and Cisco IOS Terminal Services Command Reference
publications.
Accessing the CLI Using a Directly-Connected Console
This section describes how to connect to the console port on the router and use the console interface to access
the CLI.
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Everest 16.5
OL-14127-17 1
To Next Page
Loading...
Need help?
General
