Name: Cisco ASR 1000 Series
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Framing in Unchannelized Mode Configuration Example

The following example configures framing on an unchannelized T3 interface:

! Specify the interface to configure and enter interface configuration mode.

Router(config)# interface serial 4/1/1

! Specify the framing type.

Router(config-if)# framing m13

Facility Data Link Configuration Example

The following example configures FDL on a channelized T1 interface:

! Specify the controller to configure and enter controller configuration mode.

Router(config)# controller t3 3/1/0

! Specify the T1 controller and set the FDL bit.

Router(config-controller)# t1 1 fdl ansi

Scrambling Configuration Example

The following example configures scrambling on the T3 interface:

! Enter global configuration mode.

Router# configure terminal

! Specify the interface to configure and enter interface configuration mode.

Router(config)# interface serial 4/1/3

! Enable scrambling.

Router(config-if)# scramble

Creating a Multilink Bundle Configuration Example

The following example configures multilink bundle 1 on the T3 interface:

! ! Enter global configuration mode.

Router# configure terminal

! Create a multilink interface and enter interface configuration mode.

Router(config)# interface multilink 1

! Specify the IP address for the interface.

Router(config-if)# ip address 123.1.1.1 255.255.255.0

Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE

Everest 16.5

OL-14127-17 253

Configuring the 2-Port and 4-Port Channelized T3 SPAs

Framing in Unchannelized Mode Configuration Example

Cisco ASR 1000 Series Software Configuration Guide

Other manuals for Cisco ASR 1000 Series