Cisco ASR 1000 Series Software Configuration Guide

PurposeCommand or Action
Exits interface-configuration (config-if) mode and enters configuration
mode.
exit
Example:
Router(config-if)# exit
Step 7
Exits global-configuration (config) mode and enters privilege-exec mode.exit
Example:
Router(config)# exit
Step 8
Displays the interface configuration details for the WAN PHY SPA installed
at 0/1/0.
show running-config interface
Tengigabitethernet slot/subslot/port
Step 9
Example:
Router# show running-config interface
TenGigabitethernet 0/1/0
Example:
Example:
Building configuration...
Example:
Example:
Current configuration : 115 bytes
Example:
!
Example:
interface TenGigabitEthernet0/1/0
Example:
mtu 9216
Example:
ip address 10.1.1.1 255.0.0.0
Example:
standby 0 ip 10.1.1.2 secondary
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS
XE Everest 16.5
150 OL-14127-17
Configuring the Ethernet SPAs
Configuring 1-Port 10-Gigabit Ethernet LAN/WAN PHY SPA

Cisco ASR 1000 Series Specifications

General

Series	ASR 1000
Category	Network Router
Operating System	Cisco IOS XE
Memory	Up to 64 GB
Interfaces	10 Gigabit Ethernet
Power Supply	AC or DC options
Dimensions	Varies by model
Encryption	IPsec, SSL
Storage	Varies by model
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	5% to 95% non-condensing
MTBF	Varies by model