Cisco ASR 1000 Series Software Configuration Guide

CHAPTER 5
Troubleshooting the SIP
This chapter describes techniques that you can use to troubleshoot the operation of your SIPs.
It includes the following sections:
The first section provides information about basic interface troubleshooting.
To perform more advanced troubleshooting, see the other sections in this chapter.
•
General Troubleshooting Information, page 37
•
Using the Cisco IOS Event Tracer to Troubleshoot Problems, page 38
•
Preparing for Online Insertion and Removal of a SIP and SPAs, page 38
General Troubleshooting Information
This section describes general information for troubleshooting SIPs and SPAs.
Interpreting Console Error Messages
System error messages are organized according to the particular system facility that produces the messages.
The SIP error messages use the following facility names:
•
ASR1000_SIP
•
ASR1000_SIP_SPA
Using debug Commands
Along with the other debug commands supported on the Cisco Aggregation Services Router 1000 Series,
you can obtain specific debug information for the SIP on the Cisco ASR 1000 Series Routers using the debug
hw-module command in privileged EXEC mode.
The debug hw-module command is intended for use by Cisco technical support personnel.
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Everest 16.5
OL-14127-17 37

Cisco ASR 1000 Series Specifications

General

Brand	Cisco
Model	ASR 1000 Series
Category	Network Router
Language	English