Cisco ASR 1000 Series Software Configuration Guide

Router# write memory
Router# reload
Step 11
Log in to the Cisco ASR 1000 Series Aggregation Services Router.
Step 12
Verify if the new packages are running after the Cisco ASR 1000 Series Aggregation Services Router reboots:
Example:
show version running
Step 13
Check whether the ROMMON version in the WebEx SPA is up-to-date by using the show platform command. If it is
not, use the upgrade rommon all command to update the ROMMON.
Step 14
Deploy the WebEx SPA package:
Example:
request platform software package install rp <rp-slot-number> file
bootflash:asr1000rp1-sipspawmak9.03.09.01.S.153-2.S1.pkg
Here, rp-slot-number is active-rp-slot-number.
For a dual RP system, perform this additional step:
Example:
request platform software package install rp <stby-rp-slot-number> file
stby-bootflash: asr1000rp1-sipspawmak9.03.09.01.S.153-2.S1.pkg
Step 15
Verify that the SPA is active:
Example:
show platform
Step 16
Go to https://wma.webex.com and log in.
Step 17
Choose Administration > Node Management.
Step 18
Select all the individual node names.
Step 19
Copy the wma-passcode string to all the nodes, for example, mtg_webex-web d2bc97983456676fbb7ea5cfcc2c3a57.
Step 20
Enter the configuration mode:
Example:
configure terminal
Step 21
Enter the individual SPA interfaces, and re-enter the wma-passcodes:
Example:
interface service-Engine 0/0/0
ip address <ip addr> <subnet mask>
shutdown
service-engine ip address <ip addr> <subnet mask>
service-engine default-gateway <ip addr>
service-engine nameserver <primary DNS nameserver> <secondary DNS nameserver>
service-engine hostname <spa name> <domainname>
service-engine wma-url <webex url for wma spa config>
no shutdown
show hw-module subslot <subslot> service-engine status
Repeat Step 19 for all the interfaces.
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Everest 16.5
OL-14127-17 371
Configuring the Cisco WebEx Node for the ASR 1000 Series Aggregation Services Routers
Configuring the WebEx Node

Cisco ASR 1000 Series Specifications

General

Series	ASR 1000
Category	Network Router
Operating System	Cisco IOS XE
Memory	Up to 64 GB
Interfaces	10 Gigabit Ethernet
Power Supply	AC or DC options
Dimensions	Varies by model
Encryption	IPsec, SSL
Storage	Varies by model
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	5% to 95% non-condensing
MTBF	Varies by model