Cisco ASR 1000 Series Software Configuration Guide

•
NetFlow Data Export
•
RFC 3592 performance statistics for timed intervals (current, 15-minute, multiple 15-minute, and 1-day
intervals):
◦
Section CV (code violations)
◦
Section ES (errored seconds)
◦
Section SES (severely errored seconds)
◦
Near end & Far end Line CV
◦
Near end & Far end Line ES
◦
Near end & Far end Line SES
◦
Near end & Far end Line UAS (unavailable seconds)
◦
Near end & Far end Path CV
◦
Near end & Far end Path ES
◦
Near end & Far end Path SES
◦
Near end & Far end Path UAS
Restrictions
The following table provides information about POS feature compatibility and restrictions by SIP and SPA
combination. For SIP-specific features and restrictions see Overview of SIP .
Table 21: POS Feature Compatibility and Restrictions by SIP and SPA Combination
Cisco ASR1000-SIP10Feature
Not supported on any POS SPAs.Bridge Control Protocol (BCP)
Not supported on any POS SPAs.Dynamic Packet Transport (DPT), which includes
RPR/SRP
Supported on all POS SPAs.Frame Relay
The followings are the restrictions for 1-port OC-48 POS/RPR SPA
•
Line Remote Error Indication (LREI) and Path Remote Error Indication (PREI) alarms are not reported
on the 1-port OC-48 POS/RPR SPA.
Supported MIBs
The following MIBs are supported for the POS SPAs on the Cisco ASR 1000 Series Routers:
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Everest 16.5
OL-14127-17 187
Overview of the POS SPAs
Restrictions

Cisco ASR 1000 Series Specifications

General

Series	ASR 1000
Category	Network Router
Operating System	Cisco IOS XE
Memory	Up to 64 GB
Interfaces	10 Gigabit Ethernet
Power Supply	AC or DC options
Dimensions	Varies by model
Encryption	IPsec, SSL
Storage	Varies by model
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	5% to 95% non-condensing
MTBF	Varies by model