Cisco ASR 1000 Series Software Configuration Guide

PurposeCommand or Action
Example:
Rx(K1/K2): 00/00 Tx(K1/K2): 00/00
Example:
S1S0 = 00, C2 = 0x1A
Example:
PATH TRACE BUFFER: STABLE
Example:
Remote J1 Byte : an4ru-
Example:
Example:
BER thresholds: SD = 10e-8 SF = 10e-9
Example:
TCA thresholds: B1 = 10e-4 B2 = 10e-5 B3 = 10e-6
Configuration Examples
This section includes the following configuration examples:
Basic Interface Configuration
The following example shows how to enter the global configuration mode to specify the interface that you
want to configure, configure an IP address for the interface, and save the configuration. This example configures
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Everest 16.5
OL-14127-17 169
Configuring the Ethernet SPAs
Configuration Examples

Cisco ASR 1000 Series Specifications

General

Series	ASR 1000
Category	Network Router
Operating System	Cisco IOS XE
Memory	Up to 64 GB
Interfaces	10 Gigabit Ethernet
Power Supply	AC or DC options
Dimensions	Varies by model
Encryption	IPsec, SSL
Storage	Varies by model
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	5% to 95% non-condensing
MTBF	Varies by model