Cisco ASR 1000 Series Software Configuration Guide

•
Path Diagnostics:
◦
Path alarm indication signal (PAIS)
◦
Path remote defect indication (PRDI)
◦
Path remote error indication (PREI)
◦
Error counts for B3
◦
Threshold crossing alarms for B3 (B3-TCA)
◦
Loss of pointer (PLOP)
◦
New pointer events (NEWPTR)
◦
Positive stuffing event (PSE)
◦
Negative stuffing event (NSE)
•
The following loopback tests are supported:
◦
Network (line) loopback
◦
Internal (diagnostic) loopback
•
Supported SONET/SDH synchronization:
◦
Local (internal) timing (for inter-router connections over dark fiber or wavelength division
multiplexing [WDM] equipment)
◦
Loop (line) timing (for connecting to SONET/SDH equipment)
◦ +/– 4.6 ppm clock accuracy over the full range of the operating temperature
Layer 2 Features
•
Supports the following encapsulation types:
◦
AAL5SNAP (LLC/SNAP)
◦
AAL5MUX (VC multiplexing)
◦
AAL5NLPID
•
Supports the following ATM traffic classes and per-VC traffic shaping modes:
◦
Constant bit rate (CBR) with peak rate
◦
Unspecified bit rate (UBR) with peak cell rate (PCR)
◦
Non-real-time variable bit rate (VBR-nrt)
◦
Variable bit rate real-time (VBR-rt)
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS
XE Everest 16.5
50 OL-14127-17
Overview of the ATM SPAs
Layer 2 Features

Cisco ASR 1000 Series Specifications

General

Series	ASR 1000
Category	Network Router
Operating System	Cisco IOS XE
Memory	Up to 64 GB
Interfaces	10 Gigabit Ethernet
Power Supply	AC or DC options
Dimensions	Varies by model
Encryption	IPsec, SSL
Storage	Varies by model
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	5% to 95% non-condensing
MTBF	Varies by model