Cisco ASR 1000 Series

Encapsulation Configuration Example
The following example shows how to change from the default encapsulation method of HDLC to PPP:
!Enter global configuration mode
!
Router# configure terminal
! Specify the interface address
Router(config)# interface pos 2/1/1
!
! Configure ppp
!
Router(config-if)# encapsulation ppp
POS Alarm Trigger Delays Configuration Example
The following example shows how to change POS line-level and path-level alarm trigger delays from the
default of 100 milliseconds to 200 milliseconds:
!Enter global configuration mode
!
Router# configure terminal
!
! Specify the interface address
!
Router(config)# interface pos 2/1/1
!
Router(config-if)# pos delay triggers line 200
Router(config-if)# pos delay triggers path 200
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS
XE Everest 16.5
210 OL-14127-17
Configuring the POS SPAs
Encapsulation Configuration Example