Cisco ASR 1000 Series Software Configuration Guide

Displaying the SPA Hardware Type
To verify the SPA hardware type that is installed in your Cisco ASR 1000 Series Routers, you can use the
show platform command or the show interface command (once the interface has been configured). There
are several other commands on the Cisco ASR 1000 Series Routers that also provide SPA hardware information.
The following table shows the hardware description that appears in the show command output for each type
of SPA that is supported on the Cisco ASR 1000 Series Routers.
Table 24: SPA Hardware Descriptions in show Commands
Description in show interfaces and show controllers
Commands
SPA
“Hardware is SPA-2XT3/E3”
2-Port Clear-Channel T3/E3 SPA
“Hardware is SPA-4XT3/E3”
4-Port Clear-Channel T3/E3 SPA
“Hardware is SPA-8XT3/E3”
8-Port Clear-Channel T3/E3 SPA
“Hardware is SPA-8XCHT1/E1-V2”
8-Port Channelized T1/E1 SPA
“Hardware is SPA-4XT-SERIAL”
4-Port Serial Interface SPA
“Hardware is SPA-1XCHSTM1/OC3”
1-Port Channelized OC-3/STM-1 SPA
“Hardware is SPA-1XCHOC12/DS0”
1-Port Channelized OC-12/STM-4 SPA
Examples of the show interfaces Command
The following example shows an output of the show interfaces serial command on a Cisco ASR 1000 Series
Router with a 4-Port Clear-Channel T3/E3 SPA installed in slot 2:
router#: show interfaces serial 2/0/0
Serial2/0/0 is up, line protocol is up
Hardware is SPA-4XT3/E3[3/0]
MTU 4470 bytes, BW 44210 Kbit, DLY 200 usec,
reliability 248/255, txload 1/255, rxload 1/255
Encapsulation HDLC, crc 16, loopback not set
Keepalive set (10 sec)
Last input 00:00:06, output 00:00:07, output hang never
Last clearing of ''show interface'' counters 00:00:01
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts (0 IP multicast)
0 runts, 0 giants, 0 throttles
0 parity
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 applique, 0 interface resets
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Everest 16.5
OL-14127-17 219
Overview of the Serial SPAs
Displaying the SPA Hardware Type

Cisco ASR 1000 Series Specifications

General

Series	ASR 1000
Category	Network Router
Operating System	Cisco IOS XE
Memory	Up to 64 GB
Interfaces	10 Gigabit Ethernet
Power Supply	AC or DC options
Dimensions	Varies by model
Encryption	IPsec, SSL
Storage	Varies by model
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	5% to 95% non-condensing
MTBF	Varies by model