Cisco ASR 1000 Series

PurposeCommand or Action
Example:
PATH
Example:
AIS = 0 RDI = 0 FEBE = 0
BIP(B3) = 0
Example:
LOP = 0 NEWPTR = 0 PSE = 0 NSE
= 0
Example:
WIS ALARMS
Example:
SER = 0 FELCDP = 0 FEAISP = 0
Example:
WLOS = 0 PLCD = 0
Example:
LFEBIP = 0 PBEC = 0
Example:
Example:
Active Alarms[All defects]: SWLOF LAIS PAIS SER
Example:
Active Alarms[Highest Alarms]: SWLOF
Example:
Alarm reporting enabled for: SF SWLOF B1-TCA B2-TCA PLOP WLOS
Example:
Example:
Rx(K1/K2): 00/00 Tx(K1/K2): 00/00
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Everest 16.5
OL-14127-17 157
Configuring the Ethernet SPAs
Configuring the WAN-PHY Mode