Cisco ASR 1000 Series Software Configuration Guide

Example:
write memory
Step 22
Verify that the running configuration is pointing to the correct node determined in Step 8:
Example:
show running-configuration
Step 23
Make sure that you are on the same network as the Cisco ASR 1000 Series Aggregation Services Router or VPN, and
start a WebEx meeting.
Step 24
Verify that network traffic is traversing the WebEx SPA card on the Cisco ASR 1000 Series Aggregation Services Router
by running the following commands:
Example:
show platform hardware qfp act interface if-name service-engine0/0/0 statistics
show platform hardware qfp act interface if name service-engine0/1/0 statistics
Step 25
Access the SIP console by using request platform software console attach slot/subslot command.
Configuring the WebEx Node from the Bootflash
Perform the following steps to configure the WebEx Node from the bootflash in Cisco IOS XE Release 3.9.1.
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS
XE Everest 16.5
376 OL-14127-17
Configuring the Cisco WebEx Node for the ASR 1000 Series Aggregation Services Routers
Configuring the WebEx Node

Cisco ASR 1000 Series Specifications

General

Brand	Cisco
Model	ASR 1000 Series
Category	Network Router
Language	English