Cisco ASR 1000 Series Software Configuration Guide

PurposeCommand or Action
Example:
Router(config)# controller t3 3/2/1
•
timeslots timeslots specifies the time slots to be included in the
CEM circuit. Use this keyword for the CESoPSN mode. The list
of time slots can include commas and hyphens with no spaces
between the numbers, commas, and hyphens.
Example:
Router(config-controller)# e1 1 cem-group
1 unframed
Each time slot operates at 64
kbps.
Note
Exits the controller configuration mode.Router(config-controller)# exit
Step 3
Configuring a CEM Class (Optional)
To assign CEM parameters to one or more CEM interfaces, create a CEM class (template) that defines the
parameters, and then apply the class to the interfaces.
CEM class parameters can be configured directly on the CEM circuit. The inheritance is as follows:
•
CEM circuit (highest level)
•
Class attached to CEM circuit
•
Class attached to the CEM interface
If the same parameter is configured on the CEM interface and the CEM circuit, the value on the CEM circuit
takes precedence.
To configure a CEM class, perform the following steps:
SUMMARY STEPS
1.
Router# configure terminal
2.
Router(config)# class cem name
3.
Router(config-cem-class)# command
DETAILED STEPS
PurposeCommand or Action
Enters the global configuration mode.Router# configure terminal
Step 1
Creates a CEM class to configure the parameters in a template and apply the
parameters at the CEM interface level.
Router(config)# class cem name
Step 2
•
The name argument is a string of up to 80 characters that identifies the
CEM class. Note that the name is truncated to the first 15 characters.
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS
XE Everest 16.5
500 OL-14127-17
Configuring the Circuit Emulation over Packet Shared Port Adapter
Configuring a CEM Class (Optional)

Cisco ASR 1000 Series Specifications

General

Brand	Cisco
Model	ASR 1000 Series
Category	Network Router
Language	English