SPA-24CHT1-CE-ATM 485
Guidelines for Configuring ATM Connections on a SPA 485
VC QoS on VP-PWRestriction 486
Configuring a Pseudowire for an ATM Connection 486
Configuring the T3E3 ATM and T1E1 ATM SPAs in the Layer 2 Permanent Virtual
Circuit (L2 PVC) Mode 486
Configuring the T3E3 ATM and T1E1 ATM SPAs in the Layer 2 Permanent Virtual
Path (L2 PVP) Mode 487
Configuring the T3E3 ATM and T1E1 ATM SPAs in the Layer 3 Permanent Virtual
Path (L3 PVP) Mode 488
Configuring the Layer 3 Permanent Virtual Circuit (L3 PVC) for the Point-to-Point
(P2P) Connection 489
Configuring Pseudowire Redundancy 490
Configuring the 2-Port Channelized T3/E3 ATM CEoP SPA for the T3 Mode and the E3
Mode 492
Configuring a SPA Port for the T3 Mode 492
Configuring a SPA Port for the T3 Mode 494
Configuring the T3/E3 SPA Port for the Clear-Channel ATM Mode 495
Configuring the Scrambling Payload Feature on T3/E3 SPA Port 496
Configuring CEM 497
Prerequisites 497
Configuration Guidelines and Restrictions 498
Configuring a CEM Group 499
Configuring a CEM Class (Optional) 500
Configuring a CEM Pseudowire 501
Configuring TDM Local Switching 503
Verifying Switching Connections 504
Local Switching Redundancy 504
Guidelines for Local Switching Redundancy 504
Configuring a Backup Switched Connection 504
Verifying Backup and Primary Circuits 505
Configuring Pseudowire Redundancy 505
Example 507
Configuring T1 on a 24-Port Channelized T1/E1 ATM CEoP SPA 507
Configuring E1 on a 24-Port Channelized T1/E1 ATM CEoP SPA 508
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS
XE Everest 16.5
xxiv OL-14127-17
Contents
To Next Page
Loading...
Need help?
General
