Cisco ASR 1000 Series Software Configuration Guide

Enabling the Dummy Mode 534
Setting the Dummy Pattern 534
Shutting Down a CEM Channel 534
Configuring Layer 3 QoS on CEoP SPAs 534
Restrictions 534
Supported Interface 534
Configuring the QoS Features on the 2-Port Channelized T3/E3 ATM CEoP SPA 535
Sample Configuration 536
Verifying the Configuration 536
Configuring AIS and RAI Alarm Forwarding in the CESoPSN Mode on the CEoP SPAs 537
Restrictions 537
Configuring AIS and RAI Alarm Forwarding for T1 on the CEoP SPA 538
Configuring AIS and RAI Alarm Forwarding for E1 on the CEoP SPA 539
Configuring the SONET Mode 540
Configuring the SDH AU-4 Mode 541
Configuring the SDH AU-3 Mode 542
Restrictions 542
Verifying the Interface Configuration 543
Glossary 547
ARPA 547
ATM 547
blank filler plate 547
FPD 547
FPD image package 547
LAN 547
MAC 548
MIB 548
OIR 548
PPP 548
QoS 548
SFP 548
single height 548
SIP 548
SNMP 549
SPA 549
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS
XE Everest 16.5
xxvi OL-14127-17
Contents

Cisco ASR 1000 Series Specifications

General

Series	ASR 1000
Category	Network Router
Operating System	Cisco IOS XE
Memory	Up to 64 GB
Interfaces	10 Gigabit Ethernet
Power Supply	AC or DC options
Dimensions	Varies by model
Encryption	IPsec, SSL
Storage	Varies by model
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	5% to 95% non-condensing
MTBF	Varies by model