Cisco ASR 1000 Series Software Configuration Guide

SUMMARY STEPS
1.
enable
2.
configure terminal
3.
hw-module slot 1 qos input link A bandwidth 512
4.
hw-module slot 1 qos input link A weight 50
5.
exit
6.
show platform hardware slot f0 serdes qos
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode. Enter your password
when prompted.
enable
Example:
Router> enable
Step 1
Enters global configuration mode.configure terminal
Example:
Router# configure terminal
Step 2
Assigns a guaranteed minimum bandwidth of 512
Kbps for ESI link A.
hw-module slot 1 qos input link A bandwidth 512
Example:
Router(config)# hw-module slot 1 qos input link A
bandwidth 512
Step 3
Assigns excess weight of 50 to the ESI link A of the
SIP.
hw-module slot 1 qos input link A weight 50
Example:
Router(config)#
hw-module slot 1 qos input link A weight 50
Step 4
Exits from the configuration mode and goes back to
the privilege execution mode.
exit
Example:
Router(config-if)# exit
Step 5
Displays the minimum guaranteed bandwidth and
weight configured for all the SIP slots.
show platform hardware slot f0 serdes qos
Example:
Router# show platform hardware slot f0 serdes qos
Step 6
Example:
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Everest 16.5
OL-14127-17 453
Classifying and Scheduling Packets for the ASR 1000 Series Aggregation Services Routers
Scheduling Overview

Cisco ASR 1000 Series Specifications

General

Brand	Cisco
Model	ASR 1000 Series
Category	Network Router
Language	English