Cisco ASR 1000 Series Software Configuration Guide

CHAPTER 29
Configuring the Circuit Emulation over Packet
Shared Port Adapter
This chapter provides information about configuring the Circuit Emulation over Packet (CEoP) shared port
adapters (SPAs) on the Cisco ASR 1000 Series Routers.
•
Release History, page 474
•
Configuration Tasks, page 474
•
Configuring the ATM Connection on a SPA, page 484
•
Configuring Pseudowire Redundancy , page 490
•
Configuring the 2-Port Channelized T3/E3 ATM CEoP SPA for the T3 Mode and the E3 Mode, page
492
•
Configuring CEM, page 497
•
Configuring Pseudowire Redundancy, page 505
•
Configuring T1 on a 24-Port Channelized T1/E1 ATM CEoP SPA, page 507
•
Configuring E1 on a 24-Port Channelized T1/E1 ATM CEoP SPA, page 508
•
Configuring a 24-Port Channelized T1/E1 ATM CEoP SPA in the Clear-Channel ATM Mode, page
509
•
Configuring SONET (OC-3), page 514
•
Configuring Clocking, page 517
•
Configuring CEM Parameters, page 533
•
Configuring Layer 3 QoS on CEoP SPAs, page 534
•
Configuring AIS and RAI Alarm Forwarding in the CESoPSN Mode on the CEoP SPAs, page 537
•
Verifying the Interface Configuration, page 543
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Everest 16.5
OL-14127-17 473

Cisco ASR 1000 Series Specifications

General

Series	ASR 1000
Category	Network Router
Operating System	Cisco IOS XE
Memory	Up to 64 GB
Interfaces	10 Gigabit Ethernet
Power Supply	AC or DC options
Dimensions	Varies by model
Encryption	IPsec, SSL
Storage	Varies by model
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	5% to 95% non-condensing
MTBF	Varies by model