Cisco ASR 1000 Series Software Configuration Guide

Configuration Tasks 59
Required Configuration Tasks 59
Required Configuration Tasks 61
Specifying the Interface Address on a SPA 62
Modifying the Interface MTU Size 62
Interface MTU Configuration Guidelines 63
Interface MTU Configuration Task 64
Verifying the MTU Size 65
Creating a Permanent Virtual Circuit 66
Verifying a PVC Configuration 69
Creating a PVC on a Point-to-Point Subinterface 69
Configuring a PVC on a Multipoint Subinterface 71
Verifying a Multipoint PVC Configuration 73
Configuring a Range of PVCs on a Multipoint Subinterface 73
Configuring Traffic Parameters for PVCs 75
Verifying the Traffic Parameter Configuration 77
Configuring Virtual Circuit Classes 78
Verifying the Virtual Circuit Class Configuration 80
Configuring SONET and SDH Framing 80
Verifying the SONET and SDH Framing Configuration 81
Configuring AToM VP Cell Mode Relay Support 82
VP Mode Configuration Guidelines 83
VP Mode Configuration Example 83
Verifying ATM Cell Relay VP Mode 83
Configuring PPPoEoA on ATM SPAs 84
Saving the Configuration 84
Shutting Down and Restarting an Interface on a SPA 84
Verifying the Interface Configuration 86
Verifying Per-Port Interface Status 86
Monitoring Per-Port Interface Statistics 87
Configuration Examples 87
Basic Interface Configuration Example 88
MTU Configuration Example 88
PVC on a Point-to-Point Subinterface Configuration Example 88
PVC Ranges on a Multipoint Subinterface for PPPoEoA Configuration Example 89
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS
XE Everest 16.5
vi OL-14127-17
Contents

Cisco ASR 1000 Series Specifications

General

Brand	Cisco
Model	ASR 1000 Series
Category	Network Router
Language	English