DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
99
To display the Switch’s forwarding database on the Switch.
The show flood_fdb command displays dynamically learned entries
from the Switch’s forwarding database.
Only Administrator or operator-level users can issue this command.
Example usage:
To display FDB dynamic entries:
DGS-1100-06/ME:5#show flood_fdb
Command: show flood_fdb
Flooding FDB State : Enabled
VID MAC Address Port
---- ----------------- ----
DGS-1100-06/ME:5#
To clear the Switch’s forwarding database of all dynamically learned
MAC addresses.
The clear flood_fdb command clears dynamically learned entries
from the Switch’s forwarding database.
Only Administrator or operator-level users can issue this command.
Example usage:
To clear all FDB dynamic entries:
DGS-1100-06/ME:5#clear flood_fdb
Command: clear flood_fdb
Success.
DGS-1100-06/ME:5#
To display the contents of the Switch’s multicast forwarding
database.
show multicast_fdb {vlan <vlan_name 32> | mac_address
<macaddr>}
The show multicast_fdb command displays the current contents of
the Switch’s multicast MAC address forwarding database.
To Next Page
Loading...
