D-Link DGS-1100-06/ME - Create Mld_Snooping Multicast_Vlan; Delete Mld_Snooping Multicast_Vlan; Config Mld_Snooping Multicast_Vlan

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
160
DGS-1100-06/ME:5#
create mld_snooping multicast_vlan
Purpose
To create MLD snooping multicast VLAN on the Switch.
Syntax
create mld snooping multicast_vlan <vlan_name 32> <vlanid 2-
4094>
Description
The create mld snooping multicast_vlan command creates MLD
snooping multicast VLAN on the Switch.
Parameters
<vlan_name 32> – Specifies the VLAN name of MLD snooping to be
created.
<vlanid 2-4094> – Specifies the VLAN id of MLD snooping to be
created.
Restrictions
Only administrator or operator–level users can issue this command.
Example usage:
To create the MLD snooping multicast VLAN:
DGS-1100-06/ME:5# create mld_snooping multicast_vlan rd2 10
Command: create mld_snooping multicast_vlan rd2 10
Success.
DGS-1100-06/ME:5#
delete mld_snooping multicast_vlan
Purpose
To remove MLD snooping multicast VLAN on the Switch.
Syntax
delete mld snooping multicast_vlan [<vlan_name 32> | all]
Description
The delete mld snooping multicast_vlan command removes MLD
snooping multicast VLAN on the Switch.
Parameters
<vlan_name 32> – Specifies the VLAN name of MLD snooping to be
created.
all – Specifies all MLD snooping multicast VLAN to be removed.
Restrictions
Only administrator or operator–level users can issue this command.
Example usage:
To remove the MLD snooping multicast VLAN:
DGS-1100-06/ME:5# delete mld_snooping multicast_vlan rd2
Command: delete mld_snooping multicast_vlan rd2
Success.
DGS-1100-06/ME:5#
config mld_snooping multicast_vlan
Purpose
To configure mld snooping multicast VLAN.
Syntax
config mld_snooping multicast_vlan <vlan_name 32> [[add