D-Link DGS-1100-06/ME - Delete Rmon Event; Show Rmon

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
119
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To create a RMON collection history on the Switch:
DGS-1100-06/ME:5#create rmon event 125 description linkrmon owner
dlink
Command: create rmon event 125 description linkrmon owner dlink
Success!
DGS-1100-06/ME:5#
delete rmon event
Purpose
To remove the network event.
Syntax
delete rmon event <event_index 1-65535>
Description
The delete rmon event command removes the network event on
the Switch.
Parameters
<event_index 1-65535> − Specifies the event number to be
removed.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To delete a RMON event on the Switch:
DGS-1100-06/ME:5#delete rmon event 2
Command: delete rmon event 2
Success!
DGS-1100-06/ME:5#
show rmon
Purpose
To display remote monitoring (RMON) status for the SNMP function.
Syntax
show rmon
Description
The show rmon command displays remote monitoring (RMON)
status for the SNMP function on the Switch.
Parameters
None.
Restrictions
None.
Example usage:
To display the RMON feature on the Switch:
DGS-1100-06/ME:5#show rmon
Command: show rmon
RMON is enabled