D-Link DGS-1100-06/ME - Show Igmp_Snooping Multicast_Vlan_Group

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
150
configuration is to be displayed. Up to 32 characters can be used.
Restrictions
None.
Example usage:
To show igmp snooping multicast VLAN:
DGS-1100-06/ME:5#show igmp_snooping multicast_vlan vlan default
Command: show igmp_snooping multicast_vlan vlan default
IGMP Snooping Global State : Disable
Multicast Router Only : Disable
Data Driven Learning Max Entries : 64
VLAN Name : default
Query Interval : 1
Max Response Time : 10
Robustness Value : 2
Last Member Query Interval : 1
Querier State : Disable
Querier Role : Non-Querier
Querier Select : Disable
Querier IP : 10.90.90.90
Querier Expiry Time : 0
State : Enable
Fast Leave : Disable
Version : 3
Data Driven Learning Aged Out : Disable
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a ALL
show igmp_snooping multicast_vlan_group
Purpose
To show the current status of IGMP snooping multicast VLAN froup
on the Switch.
Syntax
show igmp_snooping multicast_vlan_group <vlan_name 32>
Description
The show igmp_snooping multicast_vlan_group command
displays the current IGMP snooping configuration on the Switch.
Parameters
<vlan_name 32> − The name of the VLAN for which IGMP snooping
configuration is to be displayed. Up to 32 characters can be used.
Restrictions
None.
Example usage:
To show igmp snooping multicast VLAN group:
DGS-1100-06/ME:5# show igmp_snooping multicast_vlan_group rd1
Command: show igmp_snooping multicast_vlan_group rd1
VID Vlan Name IP Range