DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
87
index <value 1-500> − The number of entries in the history log to
display.
module <string 32> − Specifies the module of log to be displayed.
severity [debug | informational | warning] − Specifies the severity
type to be displayed.
Example usage:
To display the Switch history log:
DGS-1100-06/ME:5# show log
Command: show log
Index Time Log Text
------- ----------------------------- -------------------------------------------------------------------------------
1 Jan 1 00:00:18 2012:SYSTEM-2:System started up
DGS-1100-06/ME:5#
To save the Switch history log.
The save log command saves the contents of the Switch’s history
log.
Only Administrator or operator-level users can issue this command.
Example usage:
To save the Switch history log:
DGS-1100-06/ME:5# save log
Command: save log
Success!
DGS-1100-06/ME:5#
To enable the system log to be sent to a remote host.
The enable syslog command enables the system log to be sent to a
remote host.
Only Administrator or operator-level users can issue this command.
Example usage:
To Next Page
Loading...
