D-Link DGS-1100-06/ME - Delete 802.1 X Guest_Vlan; Config 802.1 X Guest_Vlan Ports

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
183
Description
The create 802.1x guest_vlan command enables network access
to a 802.1x Guest VLAN. A network administrator can use 802.1x
Guest VLANs to deny network access via port–based authentication,
but grant Internet access to unauthorized users.
Parameters
<vlan_name 32> − The name of the 802.1x Guest VLAN to be
created.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To create a 802.1x Guest VLAN:
DGS-1100-06/ME:5#create 802.1x guest_vlan default
Command: create 802.1x guest_vlan default
Success.
DGS-1100-06/ME:5#
delete 802.1x guest_vlan
Purpose
Disables network access to a Guest VLAN.
Syntax
delete 802.1x guest vlan <vlan_name 32>
Description
The delete 802.1x guest_vlan command disables network access
to a 802.1x Guest VLAN. A network administrator can use 802.1x
Guest VLANs to deny network access via port–based authentication,
but grant Internet access to unauthorized users.
Parameters
None.
Restrictions
Only Administrator or operator-level users can issue this command.
The user is required to disable Guest VLAN before deleting a
specific the VLAN.
Example usage:
To delete a 802.1x Guest VLAN
DGS-1100-06/ME:5#delete 802.1x guest_vlan default
Command: delete 802.1x guest_vlan default
Success.
DGS-1100-06/ME:5#
config 802.1x guest_vlan ports
Purpose
Defines a port or range of ports to be members of the Guest VLAN.
Syntax
config 802.1x guest_vlan ports [<portlist> | all] state [enable |
disable]
Description
The config 802.1x guest_vlan ports command defines a port or
range of ports to be members of the 802.1x Guest VLAN. The
802.1x Guest VLAN can be be configured to provide limited network
access to authorized member ports. If a member port is denied
network access via port–based authorization, but the 802.1x Guest