DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
10
Command: create account admin dlink
Enter a case-sensitive new password:***
Enter the new password again for confirmation:***
Success.
DGS-1100-06/ME:5#
To change the password for an existing user account.
config account <username 15>
The config account command changes the password for a user
account that has been created using the create account command.
The system prompts for the account’s new password, which may be
between 0 and 15 characters.
<username 15> − the account username.
Only Administrator-level users can issue this command.
Example usage:
To configure the user password of ‘dlink’ account:
DGS-1100-06/ME:5# config account dlink
Command: config account dlink
Enter a old password:***
Enter a case-sensitive new password:****
Enter the new password again for confirmation:****
Success.
DGS-1100-06/ME:5#
To display information about all user accounts on the Switch.
The show account command displays all account usernames and
their access levels created on the Switch. Up to 31 user accounts
can exist on the Switch at one time.
Example usage:
To display the account which have been created:
To Next Page
Loading...
