D-Link DGS-1100-06/ME - Clear Counters; Clear Log; Show Log

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
86
-------------------------------------------------------------------------------
Five Seconds - 7 % One Minute - 6 % Five Minutes - 6 %
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
DGS-1100-06/ME:5#
clear counters
Purpose
To clear the Switch’s statistics counters.
Syntax
clear counters
Description
The clear counters command clears the counters used by the
Switch to compile statistics.
Parameters
None.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To clear the counters:
DGS-1100-06/ME:5# clear counters
Command: clear counters
DGS-1100-06/ME:5#
clear log
Purpose
To clear the Switch’s history log.
Syntax
clear log
Description
The clear log command clears the Switch’s history log.
Parameters
None.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To clear the log information:
DGS-1100-06/ME:5#clear log
Command: clear log
Success!
DGS-1100-06/ME:5#
show log
Purpose
To display the Switch history log.
Syntax
show log {[index <value 1-500> - <value 1-500>] | module
<string 32> | severity [debug | informational | warning ]}
Description
The show log command displays the contents of the Switch’s
history log.