DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
238
Example usage:
To show LLDP settings:
DGS-1100-06/ME:5# show lldp
Command: show lldp
LLDP System Information
Chassis Id Subtype : MAC Address
Chassis Id : 00-AE-B7-21-22-62
System Name :
System Description : DGS-1100-06/ME 1.00.011
System Capabilities : Bridge
LLDP Configurations
LLDP Status : Enable
Message Tx Interval : 10
Message Tx Hold Multiplier: 2
ReInit Delay : 1
Tx Delay : 1
Notification Interval : 5
DGS-1100-06/ME:5#
To display the Link Layer Discovery Protocol (LLDP) ports
configuration on the switch.
show lldp ports {<portlist>}
The show lldp ports command displays the information regarding
the ports.
<portlist> ā A port or range of ports to be displayed.
Only Administrator or operator-level users can issue this command.
Example usage:
To show the information for port 1:
To Next Page
Loading...
