D-Link DGS-1100-06/ME - Config Pvid; Show Vlan

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
126
DGS-1100-06/ME:5# config vlan vlanid 3 add tagged 5
Command: config vlan vlanid 3 add tagged 5
Success
DGS-1100-06/ME:5#
config pvid
Purpose
To configure the pvid on the Switch.
Syntax
config pvid <int 1-4094> ports <portlist>
Description
The config pvid command configures the Group VLAN Registration
Protocol on the Switch.
Parameters
<int 1-4094> − Specifies the PVID to be configured.
<portlist> − A port or range of ports which user want to configure
with.
Restrictions
Only administrator or operator-level users can issue this command.
Example usage:
To configure the PVID on the Switch:
DGS-1100-06/ME:5#config pvid 1 ports 2
Command: config pvid 1 ports 2
Success.
DGS-1100-06/ME:5#
show vlan
Purpose
To display the current VLAN configuration on the Switch
Syntax
show vlan {<int 1-4094>}
Description
The show vlan command displays summary information about each
VLAN including the VLAN ID, VLAN name, the Tagging/Untagging
status, and the Member/Non-member/Forbidden status of each port
that is a member of the VLAN.
Parameters
<int 1-4094> − Specify the VLAN id to be displayed.
Restrictions
None.
Example usage:
To display the Switch’s current VLAN settings:
DGS-1100-06/ME:5# show vlan
Command: show vlan
VID : 1 VLAN NAME : default
VLAN Type : Static
Member Ports : 1-6