D-Link DGS-1100-06/ME - Show Time_Range; Show Tech Support

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
25
show time_range
Purpose
To display the currently configured access profiles on the Switch.
Syntax
show time_range
Description
The show time_range command displays the time range
configuration.
Parameters
None.
Restrictions
None.
Example usage:
To display time range settings on the Switch:
DGS-1100-06/ME:5# show time_range
Range name : xxx
Start time : 10:00
End time : 11:00
Days : wed sun
Total Entries : 1
DGS-1100-06/ME:5#
show tech support
Purpose
To display system and configuration information. to provide to the
Technical Assistance Center when reporting a problem, use the
show tech-support command.
Syntax
show tech support
Description
The show tech support command displays system and
configuration information. to provide to the Technical Assistance
Center when reporting a problem.
By default, this command displays the output for technical-support-
related show commands. Use keywords to specify the type of
information to be displayed. If you do not specify any parameters,
the system displays all configuration and memory data.
The show tech support command may time out if the configuration
file output takes longer to display than the configured session
timeout time. If this happens, enter a set logout timeout value of 0 to
disable automatic disconnection of idle sessions or enter a longer
timeout value.
The show tech support command output is continuous; it does not
display one screen at a time. To interrupt the output, press Esc.
Parameters
None.
Restrictions
None.
Example usage:
To display technical support information on the Switch:
DGS-1100-06/ME:5#show tech support
Command: show tech support
- System Info. -