D-Link DGS-1100-06/ME - Enable Snmp Twistedpair_Port_Link Traps; Disable Snmp Twistedpair_Port_Link Traps

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
62
enable snmp twistedpair_port_link traps
Purpose
To enable SNMP twisted pair ports link traps support on the Switch.
Syntax
enable snmp twistedpair_port_link traps
Description
The enable snmp twistedpair_port_link traps command enables
SNMP twisted pair ports link traps support on the Switch.
Parameters
None.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To enable the SNMP twisted pair ports link traps on the Switch:
DGS-1100-06/ME:5#enable snmp twistedpair_port_link traps
Command: enable snmp twistedpair_port_link traps
Success!
DGS-1100-06/ME:5#
disable snmp twistedpair_port_link traps
Purpose
To disable SNMP twisted pair ports link traps support on the Switch.
Syntax
disable snmp twistedpair_port_link traps
Description
The disable snmp twistedpair_port_link traps command enables
SNMP twisted pair ports link traps support on the Switch.
Parameters
None.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To disable the SNMP twisted pair ports link traps on the Switch:
DGS-1100-06/ME:5#disable snmp twistedpair_port_link traps
Command: disable snmp twistedpair_port_link traps
Success!
DGS-1100-06/ME:5#