D-Link DGS-1100-06/ME - Disable Snmp Fiber_Port_Link Traps; Enable Snmp LBD Traps; Disable Snmp LBD Traps

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
59
Success!
DGS-1100-06/ME:5#
disable snmp fiber_port_link traps
Purpose
To disable SNMP fiber port link traps.
Syntax
disable snmp fiber_port_link traps
Description
The disable snmp fiber_port_link traps command disables SNMP
fiber port link traps support on the Switch.
Parameters
None.
Restrictions
Only Administrator or operator-level users can issue this command
Example usage:
To disable SNMP fiber port link traps support on the Switch:
DGS-1100-06/ME:5#disable snmp fiber_port_link traps
Command: disable snmp fiber_port_link traps
Success!
DGS-1100-06/ME:5#
enable snmp LBD traps
Purpose
To enable SNMP LBD traps.
Syntax
enable snmp LBD traps
Description
The enable snmp LBD traps command enables SNMP LBD traps
support on the Switch.
Parameters
None.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To enable SNMP LBD traps support on the Switch:
DGS-1100-06/ME:5#enable snmp LBD traps
Command: enable snmp LBD traps
Success!
DGS-1100-06/ME:5#
disable snmp LBD traps
Purpose
To disable SNMP LBD traps.
Syntax
disable snmp LBD traps
Description
The disable snmp LBD traps command disables SNMP LBD traps