D-Link DGS-1100-06/ME - Show Authen_Policy; Config Authen Application

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
221
DGS-1100-06/ME:5#disable authen_policy
Command: disable authen_policy
Success.
DGS-1100-06/ME:5#
show authen_policy
Purpose
Used to display the system access authentication policy status on
the Switch.
Syntax
show authen_policy
Description
The show authen_policy command display the system access
authentication policy status on the Switch.
Parameters
None.
Restrictions
None.
Example usage:
To display the system access authentication policy:
DGS-1100-06/ME:5#show authen_policy
Command: show authen_policy
Authentication Policy : Disabled
DGS-1100-06/ME:5#
config authen application
Purpose
To configure various applications on the Switch for authentication
using a previously configured method list.
Syntax
config authen application [console | http | all] [login | enable]
[default | method_list_name <string 15>]
Description
The config authen application command configures Switch
applications (console, Telnet) for login at the user level and at the
administration level (authen_enable), utilizing a previously
configured method list.
Parameters
application – Specifies the application to configure. One of the
following four options may be selected:
 console – Configures the command line interface login
method.
 http – Configures the http login method.
 all – Configures all applications as (console, Telnet, SSH)
login methods.
login – Configures an application for normal login on the user level,
using a previously configured method list.
enable – Configures an application for upgrading a normal user level
to administrator privileges, using a previously configured method list.
default – Configures an application for user authentication using the