D-Link DGS-1100-06/ME - Reboot

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
19
DGS-1100-06/ME:5# save
Command: save
Building configuration ...
[OK]
DGS-1100-06/ME:5#
reboot
Purpose
To reboot the Switch.
Syntax
reboot
Description
The reboot command restarts the Switch.
Parameters
None.
Restrictions
Only Administrator or operate-level users can issue this command.
Example usage:
To restart the Switch:
DGS-1100-06/ME:5# reboot
Command: reboot
Are you sure you want to proceed with the system reboot?(y/n)y
% Please wait, the switch is rebooting...
DGS-1100-06/ME:5#
DGS-1100-06/ME:5# System will Reboot....
Boot Procedure
--------------------------------------------------------------------------------
PP_init for CAMEO DGS-1100-06ME(instead of EEPROM)
Please wait, loading Runtime image ........................ 100%
MAC Address : 00-AE-B7-21-22-62
H/W Version : Rev.A1
F/W Version : 1.00.008
...........................................
DGS-1100-06/ME Gigabit Ethernet Switch
Command Line Interface
Copyright(C) 2012 D-Link Corporation. All rights reserved.
DGS-1100-06/ME login: