D-Link DGS-1100-06/ME - Enable Igmp_Snooping Multicast_Vlan; Disable Igmp_Snooping Multicast_Vlan; Show Igmp_Snooping Multicast_Vlan

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
149
enable igmp_snooping multicast_vlan
Purpose
To enable IGMP snooping multicast VLAN on the Switch.
Syntax
enable igmp_snooping multicast_vlan
Description
The enable igmp_snooping multicast_vlan command enables
IGMP snooping on the Switch.
Parameters
multicast_vlan − Enables the multicast VLAN for IGMP Snooping on
the Switch.
Restrictions
Only administrator or operator-level users can issue this command.
Example usage:
To enable IGMP snooping multicast VLAN on the Switch:
DGS-1100-06/ME:5#enable igmp_snooping multicast_vlan
Command: enable igmp_snooping multicast_vlan
Success !
DGS-1100-06/ME:5#
disable igmp_snooping multicast_vlan
Purpose
To disable IGMP snooping multicast VLAN on the Switch.
Syntax
disable igmp_snooping multicast_vlan
Description
The disable igmp_snooping multicast_vlan command disables
IGMP snooping multicast VLAN on the Switch. IGMP snooping can
be disabled only if IP multicast routing is not being used. Disabling
IGMP snooping allows all IGMP and IP multicast traffic to flood
within a given IP interface.
Parameters
multicast_vlan − Disables the multicast VLAN for IGMP Snooping on
the Switch.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
TTo disable IGMP snooping multicast VLAN on the Switch:
DGS-1100-06/ME:5#disable igmp_snooping multicast_vlan
Command: disable igmp_snooping multicast_vlan
Success !
DGS-1100-06/ME:5#
show igmp_snooping multicast_vlan
Purpose
To show the current status of IGMP snooping multicast VLAN on the
Switch.
Syntax
show igmp_snooping multicast_vlan <vlan_name 32>
Description
The show igmp_snooping command displays the current IGMP
snooping configuration on the Switch.
Parameters
<vlan_name 32> − The name of the VLAN for which IGMP snooping