D-Link DGS-1100-06/ME - Enable Asymmetric_Vlan; Disable Asymmetric_Vlan; Show Asymmetric_Vlan

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
127
Untagged Ports : 1-6
DGS-1100-06/ME:5#
enable asymmetric_vlan
Purpose
To enable Asymmetric VLAN on the switch.
Syntax
enable asymmetric_vlan
Description
The enable asymmetric_vlan command, along with the disable
enable asymmetric_vlan command below, is used to enable and
disable Asymmetric VLAN on the Switch
Parameters
None.
Restrictions
Only administrator or operator-level users can issue this command.
Example usage:
To enable Asymettric VLAN on the switch:
DGS-1100-06/ME:5#enable asymmetric_vlan
Command: enable asymmetric_vlan
Success
DGS-1100-06/ME:5#
disable asymmetric_vlan
Purpose
To disable Asymmetric VLAN on the switch.
Syntax
disable asymmetric_vlan
Description
The disable asymmetric_vlan command, along with the enable
asymmetric_vlan command below, is used to disable and enable
Asymmetric VLAN on the Switch.
Parameters
None.
Restrictions
Only administrator or operator-level users can issue this command.
Example usage:
To disable asymmetric_vlan on the switch:
DGS-1100-06/ME:5#disable asymmetric_vlan
Command: disable asymmetric_vlan
Success
DGS-1100-06/ME:5#
show asymmetric_vlan
Purpose
To display the Asymmetric VLAN status on the Switch.
Syntax
show asymmetric_vlan
Description
The show asymmetric_vlan command displays the Asymmetric
VLAN status on the Switch.
Parameters
None.