D-Link DGS-1100-06/ME - Show Ipif

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
135
Success!
DGS-1100-06/ME:5#
show ipif
Purpose
To display the configuration of an IP interface on the Switch.
Syntax
show ipif
Description
The show ipif command displays the configuration of an IP interface
on the Switch.
Parameters
None.
Restrictions
None.
Example usage:
To display IP interface settings:
DGS-1100-06/ME:5# show ipif
Command: show ipif
IP Setting Mode : Static
IP Address : 10.90.90.90
Subnet Mask : 255.0.0.0
Default Gateway : 0.0.0.0
Interface Admin State : Enabled
DHCPv6 Client State : Disabled
IPv6 Link-Local Address :
IPv6 Global Unicast Address :
DHCP Option12 State : Disabled
DHCP Option12 Host Name : DGS-1100-06/ME
Ipv4 State : Enabled
IPv6 State : Enabled
DGS-1100-06/ME:5#