DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
64
Each command is listed in detail, as follows:
To enable the discovery trap from smartconsole support of the
Switch.
enable discover_trap [ipaddr]
The enable discover_trap command enables discovery traps
support on the Switch.
[ipaddr] – Specifies the IP address to be trapped to.
Only Administrator or operator-level users can issue this command.
Example usage:
To enable the discovery trap to IP 10.90.90.97:
DGS-1100-06/ME:5# enable discover_trap 10.90.90.97
Command: enable discover_trap 10.90.90.97
Success.
DGS-1100-06/ME:5#
To disable the discovery trap from smartconsole support of the
Switch.
The disable discover_trap command disables discovery traps
support on the Switch.
Only Administrator or operator-level users can issue this command.
Example usage:
To disable the discovery trap:
DGS-1100-06/ME:5# disable discover_trap
Command: disable discover_trap
Success.
DGS-1100-06/ME:5#
enable discover_trap_event DeviceBoot
To enable the discovery device bootup trap from smartconsole
To Next Page
Loading...
