D-Link DGS-1100-06/ME - Show Igmp_Snooping; Config Igmp_Snooping

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
142
DGS-1100-06/ME:5# disable igmp_snooping
Command: disable igmp_snooping
Success !
DGS-1100-06/ME:5#
show igmp_snooping
Purpose
To display IGMP snooping on the Switch.
Syntax
show igmp_snooping {vlan <vlan_name 20>}
Description
The show igmp_snooping command displays IGMP snooping on
the Switch.
Parameters
vlan <vlan_name 20> − Displays the vlan for IGMP Snooping on the
Switch.
Restrictions
None.
Example usage:
To display IGMP snooping on the Switch:
DGS-1100-06/ME:5# show igmp_snooping vlan default
Command: show igmp_snooping vlan default
IGMP Snooping Global State : Enable
Forward Router Only : Disable
Vlan Name : default
Host Timeout : 260
Leave Timer : 1
Router Timeout : 125
Querier State : Disable
Querier Router Behavior : Non-Querier
Querier Version : IGMPV2
State : Disable
Multicast Fast Leave : Disable
DGS-1100-06/ME:5#
config igmp_snooping
Purpose
To configure IGMP snooping on the Switch.
Syntax
config igmp_snooping [vlan_name <string 20> | vlanid <vidlist>
| all] [host_timeout <sec 130-153025> | router_timeout <sec 60-
600> | leave_timer <sec 1-25> | fast_leave [enable | disable] |
state [enable | disable]]
Description
The config igmp_snooping command configures IGMP snooping
on the Switch.
Parameters
vlan_name <string 20> − The name of the VLAN for which IGMP
snooping is to be configured.
vlanid <vidlist> − The VLAN id for which IGMP snooping is to be