D-Link DGS-1100-06/ME - Show Dhcp_Local_Relay; Enable Dhcpv6_Relay

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
80
Success
DGS-1100-06/ME:5#
show dhcp_local_relay
Purpose
To display which VLAN’s the feature works on.
Syntax
show dhcp_local_relay
Description
Each VLAN which was added to the DHCP Local Relay list
participates in the DHCP Local Relay process – Option 82 is added
to DHCP requests on this VLAN, and Removed from DHCP Replies
on this VLAN.
Parameters
None.
Restrictions
None.
Example usage:
To display the DHCP local relay information on the Switch:
DGS-1100-06/ME:5#show dhcp_local_relay
Command: show dhcp_local_relay
DHCP/BOOTP Local Relay Status : Disabled
DHCP/BOOTP Local Relay VID List :
DGS-1100-06/ME:5#
enable dhcpv6_relay
Purpose
To enable DHCPv6 Relay function on the Switch
Syntax
enable dhcpv6_relay
Description
The enable dhcpv6_relay command is used to enable the DHCPv6
relay global state on the Switch.
Parameters
None.
Restrictions
Only Administrator or operate-level users can issue this command.
Example usage:
To enable DCHPv6 Relay on the Switch:
DGS-1100-06/ME:5#enable dhcpc6_relay
Command: enable dhcpc6_relay
Success!
DGS-1100-06/ME:5#