D-Link DGS-1100-06/ME - Disable Discover_Trap_Event Deviceboot; Enable Discover_Trap_Event Fiberport

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
65
support of the Switch.
Syntax
enable discover_trap_event DeviceBoot
Description
The enable discover_trap_event DeviceBoot command enables
discovery device bootup trap support on the Switch.
Parameters
None.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To enable the discovery device boot trap:
DGS-1100-06/ME:5# enable discover_trap_event DeviceBoot
Command: enable discover_trap_event DeviceBoot
Success.
DGS-1100-06/ME:5#
disable discover_trap_event DeviceBoot
Purpose
To disable the discovery device bootup trap from smartconsole
support of the Switch.
Syntax
disable discover_trap_event DeviceBoot
Description
The disable discover_trap_event DeviceBoot command disables
discovery device bootup trap support on the Switch.
Parameters
None.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To disable the discovery device boot trap:
DGS-1100-06/ME:5# disable discover_trap_event DeviceBoot
Command: disable discover_trap_event DeviceBoot
Success.
DGS-1100-06/ME:5#
enable discover_trap_event FiberPort
Purpose
To enable the discovery fiber port trap from smartconsole support of
the Switch.
Syntax
enable discover_trap_event FiberPort
Description
The enable discover_trap_event FiberPort command enables
discovery fiber port trap support on the Switch.
Parameters
None.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To enable the discovery fiber port trap: