D-Link DGS-1100-06/ME - Clear Ethernet_Oam Ports

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
260
To show Ethernet OAM event log on port 1:
DGS-1100-06/ME:5# show ethernet_oam ports 1 event_log
Command: show ethernet_oam ports 1 event_log
Port 1
-----------------------------------------------------------------------
Event Listing
Index Type Location Time Stamp
----- ------------------------------------------- ------------- ---------------------
Local Event Statistics
Error Symbol Event : 0
Error Frame Event : 0
Error Frame Period Event : 0
Errored Frame Seconds Event : 0
Critical Event : 0
Remote Event Statistics
Error Symbol Event : 0
Error Frame Event : 0
Error Frame Period Event : 0
Errored Frame Seconds Event : 0
Critical Event : 0
DGS-1100-06/ME:5#
clear ethernet_oam ports
Purpose
Used to clear Ethernet OAM port statistics or event log.
Syntax
clear ethernet_oam ports [all | <portlist>] [event_log| statistics]
Description
The clear ethernet_oam ports command is used to clear Ethernet
OAM ports statistics or event log information.
Parameters
[all | <portlist>] – Specifies a range of ports or all ports to clear OAM
statistics or event log.
[event_log | statistics]> – Specifies an index range to display.
Restrictions
None.
Example usage:
To clear port 1 OAM statistics:
DGS-1100-06/ME:5# clear ethernet_oam ports 1 statistics
Command: clear ethernet_oam ports 1 statistics
Success!
DGS-1100-06/ME:5#