D-Link DGS-1100-06/ME - Enable Discover_Trap_Event Portsecurity; Disable Discover_Trap_Event Portsecurity

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
68
Example usage:
To disable the discovery loopback detection trap:
DGS-1100-06/ME:5# disable discover_trap_event LBD
Command: disable discover_trap_event LBD
Success.
DGS-1100-06/ME:5#
enable discover_trap_event PortSecurity
Purpose
To enable the discovery port security trap from smartconsole
support of the Switch.
Syntax
enable discover_trap_event PortSecurity
Description
The enable discover_trap_event PortSecurity command enables
discovery l port security trap support on the Switch.
Parameters
None.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To enable the discovery port security trap:
DGS-1100-06/ME:5# enable discover_trap_event PortSecurity
Command: enable discover_trap_event PortSecurity
Success.
DGS-1100-06/ME:5#
disable discover_trap_event PortSecurity
Purpose
To disable the discovery port security trap from smartconsole
support of the Switch.
Syntax
disable discover_trap_event PortSecurity
Description
The disable discover_trap_event PortSecurity command disables
discovery port security trap support on the Switch.
Parameters
None.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To disable the discovery port security trap:
DGS-1100-06/ME:5# disable discover_trap_event PortSecurity
Command: disable discover_trap_event PortSecurity
Success.
DGS-1100-06/ME:5#