D-Link DGS-1100-06/ME - Create Auto_Fdb; Delete Auto_Fdb; Show Auto_Fdb

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
102
3 Filtering Unregistered Groups
4 Forward Unregistered Groups
5 Forward Unregistered Groups
6 Forward Unregistered Groups
DGS-1100-06/ME:5#
create auto_fdb
Purpose
To create a static entry in the auto forwarding table (database).
Syntax
create auto_fdb <ipaddr>
Description
The create auto_fdb command creates a static entry in the
multicast MAC address forwarding table (database).
Parameters
<ipaddr> − The IP address to be added to the auto forwarding table.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To create auto forwarding table:
DGS-1100-06/ME:5#create auto_fdb 172.21.47.13
Command: create auto_fdb 172.21.47.13
Success.
DGS-1100-06/ME:5#
delete auto_fdb
Purpose
To delete a static entry in the auto forwarding table (database).
Syntax
delete auto_fdb <ipaddr>
Description
The delete auto_fdb command removes a static entry in the
multicast MAC address forwarding table (database).
Parameters
<ipaddr> − The IP address to be deleted from the auto forwarding
table.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To delete auto forwarding table:
DGS-1100-06/ME:5#delete auto_fdb 172.21.47.13
Command: delete auto_fdb 172.21.47.13
Success.
DGS-1100-06/ME:5#
show auto_fdb
Purpose
To display a static entry in the auto forwarding table (database).
Syntax
show auto_fdb {<ipaddr>}
Description
The show auto_fdb command displays a static entry in the
multicast MAC address forwarding table (database).