D-Link DGS-1100-06/ME - Clear Igmp_Snooping Statistic Counter

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
153
Description
The show igmp_snooping statistic counter command displays
the current IGMP snooping statistic counter table entries currently
configured on the Switch.
Parameters
vlan_name <string 20> – The name of the VLAN for which to view
the IGMP snooping statistic counter configurations.
vlanid <vidlist> – The id of the VLAN for which to view the IGMP
snooping statistic counter configurations.
all – Displays that all IGMP snooping which configured for all VLANs
on the Switch.
ports <portlist> – The ports of the VLAN for which to view the IGMP
snooping statistic counter configurations.
Restrictions
None.
Example usage:
To view the IGMP snooping statistic counter table on the Switch:
DGS-1100-06/ME:5# show igmp_snooping statistic counter vlanid 1
Command: show igmp_snooping statistic counter vlanid 1
Snooping Statistics for VLAN 1
General queries received : 0
Group specific queries received : 0
Group and source specific queries received : 0
ASM reports received : 0
SSM reports received : 0
IS_INCLUDE messages received : 0
IS_EXCLUDE messages received : 0
TO_INCLUDE messages received : 0
TO_EXCLUDE messages received : 0
ALLOW messages received : 0
Block messages received : 0
Leave messages received : 0
General queries transmitted : 0
Group specific queries transmitted : 0
ASM reports transmitted : 0
SSM reports transmitted : 0
Leaves transmitted : 0
Packets dropped : 0
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a ALL
clear igmp_snooping statistic counter
Purpose
To clear the IGMP snooping statistic counter table entries on the
Switch.
Syntax
clear igmp_snooping statistic counter
Description
The clear igmp_snooping statistic counter command clears the
current IGMP snooping statistic counter table entries currently