D-Link DGS-1100-06/ME - Disable Dhcp_Local_Relay; Config Dhcp_Local_Relay

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
79
To enable the DHCP Local Relay:
DGS-1100-06/ME:5#enable dhcp_local_relay
Command: enable dhcp_local_relay
Success
DGS-1100-06/ME:5#
disable dhcp_local_relay
Purpose
To disable the DHCP local relay feature globally
Syntax
disable dhcp_local_relay
Description
The disable dhcp_local_relay command disables the DHCP local
relay feature on the Switch.
Parameters
None.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To disable the DHCP Local Relay:
DGS-1100-06/ME:5#disable dhcp_local_relay
Command: disable dhcp_local_relay
Success
DGS-1100-06/ME:5#
config dhcp_local_relay
Purpose
To specify which VLAN’s the feature works on.
Syntax
config dhcp_local_relay [vlan <vlan_name> | vlanid <vidlist>]
state[enable | disable]
Description
Each VLAN which was added to the DHCP Local Relay list
participates in the DHCP Local Relay process – Option 82 is added
to DHCP requests on this VLAN, and Removed from DHCP Replies
on this VLAN.
Parameters
vlan <vlan_name> – the VLAN name identifier
vlanid <vidlist> – The VLAN tag identifier
state [enable | disable] – enable or disable of the DHCP Local Relay
status by VLAN name or VLAN ID.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To disable the VLAN ID10 from VLAN of DHCP Local Relay:
DGS-1100-06/ME:5#config dhcp_local_relay vlan vlanid 10 state disable
Command: config dhcp_local_relay vlan vlanid 10 state disable