D-Link DGS-1100-06/ME - Show Max_Mcast_Group Ports

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
172
To configure the IPv4 maximum multicast address groups on ports 1 and 3 as 10:
DGS-1100-06/ME:5#config max_mcast_group ports 1,3 ipv4 max_group 10
Command: config max_mcast_group ports 1,3 ipv4 max_group 10
Success.
DGS-1100-06/ME:5#
show max_mcast_group ports
Purpose
To display maximum multicast group ports on the Switch.
Syntax
show max_mcast_group ports <portlist> {[ipv4 | ipv6]}
Description
The show max_mcast_group ports command displays the
multicast filtering profiles settings.
Parameters
<portlist> - Specify a port or range of ports to be displayed.
{[ipv4 | ipv6]} – Specify the IPv4 or IPv6 to be displayed.
Restrictions
None.
Example usage:
To show IPv6 maximum multicast group port 1 to 3 settings:
DGS-1100-06/ME:5# show max_mcast_group ports 1-3 ipv6
Command: show max_mcast_group ports 1-3 ipv6
Port Max Group
---- ---------
1 (v6) 32
2 (v6) 32
3 (v6) 32
DGS-1100-06/ME:5#