DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
12
To display information about currently logged-in users.
The show session command displays a list of all the users that are
logged-in at the time the command is issued. The information
includes the session ID (0 for the first logged-in user, 1 for the next
logged-in user, etc.), the Protocol used to connect to the Switch, the
user’s IP address, the user’s access Level (1=user, 15=admin), and
the account name on the Switch.
Example usage:
To display the way users logged in:
DGS-1100-06/ME:5# show session
Command: show session
Total Entries: 1
ID Login Time Live Time From Level Name
-- ----------------------------- ----------- --------------- ----- ---------------
0 Jan 1 01:04:08 2012 00:11:05 14 root
Total Entries: 1
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
To display information about the Switch.
The show switch command displays information about the Switch
settings, including Device Type, MAC Address, IP configuration,
Hardware/Software version, System information, and Switch
Network configuration.
Example usage:
To display the Switch information:
DGS-1100-06/ME:5# show switch
Command: show switch
System name :
System Contact :
System Location :
To Next Page
Loading...
