DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
164
show mld_snooping mrouter_ports
To display information on dynamically learnt and static multicast
router interfaces.
show mld_snooping mrouter_ports [vlan_name <string 20> |
vlanid <vidlist> | all ] [dynamic | static | forbidden]
The show mld_snooping mrouter_ports command displays on
dynamically learnt and static multicast router interfaces.
vlan_name <string 20> – Specifies on which VLAN mld snooping
groups should be shown.
vlanid <vidlist> – Displays that the mld snooping applies only to this
previously created VLAN id.
all – Displays that all MLD snooping which configured for all VLANs
on the Switch.
static − Displays statically configured MLD router ports.
dynamic − Displays dynamically configured MLD router ports.
forbidden − Displays forbidden configured MLD router posts.
Example usage:
To show the MLD_snooping mrouterport:
DGS-1100-06/ME:5#show mld_snooping mrouter_ports vlanid 2 dynamic
Command: show mld_snooping mrouter_ports vlanid 2 dynamic
Total Entries : 0
DGS-1100-06/ME:5#
show mld_snooping statistic counter
To display the MLD snooping statistics counters for MLD protocol
packets that are transmitted or received by the switch since MLD
snooping was enabled.
show mld_snooping statistic counter [vlan_name <string 20> |
vlanid <vidlist> | all | port
s <portlist>]
The show mld_snooping statistic counter command displays the
MLD snooping statistics counters for MLD protocol packets that are
transmitted or received by the switch since MLD snooping was
enabled.
vlan_name <string 20> – Specifies on which VLAN mld snooping
groups should be shown.
vlanid <vidlist> – Displays that the mld snooping applies only to this
previously created VLAN id.
all – Displays that all MLD snooping which configured for all VLANs
on the Switch.
ports <portlist> – Specifies a list of ports to be displayed.
Example usage:
To show the MLD snooping statistic counte
DGS-1100-06/ME:5#show mld_snooping statistic counter all
To Next Page
Loading...
