D-Link DGS-1100-06/ME - Config Dhcp_Relay Delete Ipif System; Config Dhcp_Relay

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
76
config dhcp_relay delete ipif System
Purpose
To delete a DHCP server from the DHCP Relay server list.
Syntax
config dhcp_relay delete ipif System <ipaddr>
Description
The config dhcp_relay delete ipif System command deletes a
DHCP servers defined as a DHCP Relay server.
Parameters
<ipaddr> − The IP address of the DHCP server.
Restrictions
Only Administrator or operate-level users can issue this command.
Example usage:
To remove a DHCP server from the DHCP Relay server list:
DGS-1100-06/ME:5#config dhcp_relay delete ipif System 10.6.150.49
Command: config dhcp_relay delete ipif System 10.6.150.49
Success!
DGS-1100-06/ME:5#
config dhcp_relay
Purpose
To delete a DHCP server from the DHCP Relay server list.
Syntax
config dhcp_relay hops <value 1-16>
Description
The config dhcp_relay hops command configures the
DHCP/BOOTP relay feature.
Parameters
hops <value 1-16> − Specifies the maximum number of relay agent
hops that the DHCP packets can cross.
Restrictions
Only Administrator or operate-level users can issue this command.
Example usage:
To configure the DHCP relay on the Switch:
DGS-1100-06/ME:5#config dhcp_relay hops 12
Command: config dhcp_relay hops 12
Success!
DGS-1100-06/ME:5#