D-Link DGS-1100-06/ME - Delete Authen_Enable Method_List_Name; Show Authen_Enable

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
219
DGS-1100-06/ME:5#config authen_enable method_list_name Trinity method
radius local
Command: config authen_enable method_list_name Trinity method radius local
Success.
DGS-1100-06/ME:5#
delete authen_enable method_list_name
Purpose
To delete a user-defined list of authentication methods for promoting
normal user level privileges to Administrator level privileges on the
Switch.
Syntax
delete authen_enable method_list_name <string 15>
Description
The delete authen_enable method_list_name command deletes a
user-defined list of authentication methods for promoting user level
privileges to Adminstrator level privileges.
Parameters
<string 15> - The previously created authen_enable
method_list_name to be deleted.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To delete the user-defined method list ‘Permit’
DGS-1100-06/ME:5#delete authen_enable method_list_name Permit
Command: delete authen_enable method_list_name Permit
Success.
DGS-1100-06/ME:5#
show authen_enable
Purpose
To display the list of authentication methods for promoting normal
user level privileges to Administrator level privileges on the Switch.
Syntax
show authen_enable [all | default | method_list_name <string
15>]
Description
The show authen_enable command deletes a user-defined list of
authentication methods for promoting user level privileges to
Adminstrator level privileges.
Parameters
default – Displays the default method list for users attempting to gain
access to Administrator level privileges on the Switch.
method_list_name <string 15> – The method_list_name to be
displayed.
all – Displays all the authentication login methods currently
configured on the Switch.
The command displays the following parameters:
 Method List Name – The name of a previously configured
method list name.